load data for Hornady 7mm Amax

f*tboyz said: Anyone loading 162 gr Hornady Amax in the 7mm Rem Mag? I'm looking for load data for the 162 grain Amax. The IMR reloading page has data for the Hornady 162 grain SPBT.

c*riksson said: you are better off asking in the reloading section

350 M*g said: try this page for 7mm Rem mag..... http://www.reloadersnest.com/query_bw.asp?CaliberID=48&BulletWeight=162

Myst*c Precision said: Rem brass, Re25, Fed 215M primers. You can sub Win brass too. Follow the data from Alliant and you will find best performance and speed near or at the upper end of the load info. Has shot wonderfully accurate in my rifles. Jerry

ch*vboy1978 said: i'm loading hornady 162gr sst bullets with H1000 powder. i'm still working on the load but i have tight groups. check out the hornady reloading manual. I'm usng 67.1 grains of powder and getting a 1/2 inch group at 100 meters. Good luck.

t*mmy204 said: Rem brass, Re25, Fed 215M primers. You can sub Win brass too. Follow the data from Alliant and you will find best performance and speed near or at the upper end of the load info. Has shot wonderfully accurate in my rifles. Jerry ^ X2 rl 25 fast accurate and consistant.

RCBS Reloading Dies

RCBS Dies, reloading press kits and more

 RCBS 22 Remington Jet Full Length Die Set
RCBS 22 Remington Jet Full Length Die Set
   $22.50
See More like this...
Rcbs Reloading Dies 38/.357mag
Rcbs Reloading Dies 38/.357mag
   $20.65
See More like this...
rcbs 38/357 die set
rcbs 38/357 die set
   $20.00
See More like this...



Related information